Expert Answers about GMC Work Lights
- Removing Solar Powered LED Porch Lights for Transporting
- The Solar Powered LED Porch Light for RVs light # DG0132 does not need to be removed during transport.
These do work great I can confirm from a colleague here who has owned several of these lights for over a year. They still work great for him at his home currently.
view full answer... - Are LED Trailer lights More Durable than Incandescent Light Bulbs
- LED lights are more durable and can withstand more shock than incandescent bulbs. Regular bulbs are pretty fragile by comparison.
That is not to say that the LEDs are indestructible but they will hold up better than regular bulbs when shock is applied.
It sounds like you need something like # RA-27C to help with lifting and lowering the gate. I have included a link to a video that shows how it works.
view full answer... - Are the Optronics LED Light Kit Water Resistant
- The Optronics LED Light Kit, # 98174LED, is designed as a sealed unit that make them resistant to weather.
Unfortunately, we don not have a flat bracket for these lights.The Trailer Light Mounting Brackets, # BK70BB, may be able to flattened so you can be able to mount then on the outer edge of your bike rack.
view full answer... - Location of Trailer Running Light Fuse Under Hood of 2015 Ford F-350
- I found an online diagram for the fuse box of your 2015 Ford F-350 and according to it the trailer running light fuse is in the 26 position and takes a 30 amp fuse. It's labeled as trailer tow park lamps which may be why it was harder to track down.
view full answer... - Is Optronics Opti-Brite LED RV Dome Light ILL36CB Dimmable?
- Yes. The Optronics Opti-Brite LED RV Dome Light - 227 Lumens - Rectangle - White Lens # ILL36CB is designed to be dimmable down to 8 volts at which point the light will turn off. I reached out to my tech contact at the manufacturer to confirm.
view full answer... - My LED Trailer Light Hitch # CR-007G Only Lights Up When Using A Converter
- If you got something like this Adapter 7 Pole to 4 Pole with Tester # 47345 you will be able to convert your 7 pole to the 4 pole you need to power your light # CR-007G, you can also test to see if everything is working. If everything is, I think you may have an issue with your wiring with your factory 4 pole. You may also want to check your fuse box for a blown fuse. Also try to check your factory wire connection under your truck bed.
view full answer... - Trailer Turn Signals and Brake Lights Not Working when Connected to a 2013 Ram 1500
- Like you have said, the 2013 Ram 1500, if so-equipped, will have both a 7-Way and a 4-Way trailer connector at the back. In order to determine where the problem is you will need to use a circuit tester, # PTW2992, if you do not already have one.
Have someone sit in the truck and go through the light functions while you test the 4-Way with the circuit tester. If everything works on the truck side, then that indicates a problem on the trailer. If the same problem exists on the truck side...
view full answer... - What is the Lens on the Gustafson RV Puck Light Made From
- The lens on the Gustafson RV Puck Light # 277-000344 is made from a hard plastic, not glass, so you won't have to worry about them breaking. This is a recessed mounted light that is designed to work on 12v electrical systems.
view full answer... - LED Trailer Light Kit # TLL9RK with Stainless Steel Mounting Bolts Recommendation for Salt Water
- This Submersible LED Trailer Light Kit with 25 foot Wiring Harness, part # TLL9RK, uses all stainless steel mounting hardware.
The mounting hardware of this trailer light kit should work well in the saltwater conditions that you use your boat in.
view full answer... - What Wire Gauge Is The Optronics LED Trailer License Plate Light?
- The Optronics LED Trailer License Plate Light with Bracket # LPL56CB uses 20 gauge wire. This thin wire is all that is needed to power the led light as it only draws 0.045 amps at 12.8 volts.
view full answer... - Is Diamond 906/921 LED Light Bulb UL Listed
- The 906/921 LED Light Bulb # DI98VR hasn't undergone UL testing as of yet (January of 2024) but my contact did say they are actively working on getting it UL listed.
view full answer... - Troubleshooting Trailer Wiring Where Blinkers are Wired Backwards
- To fix your blinker problem you need to just switch the left and right turn signal wires of the trailer wiring and you'll have them corrected. These two circuits are found in the 9:00 and 3:00 position of the connector.
If you have an extra wire that is red that you don't know where it goes it most likely is the aux cable which would connect to typically a purple wire of a 7-way. Sometimes this is also yellow.
view full answer... - Is 67 Bulb Correct License Plate Light Replacement?
- Though the wattage for Replacement Bulb # 67 was not available, this 12V bulb will replace all #67 bulbs so you only need to be sure that is the correct replacement bulb for your 1993 Mitsubishi Mighty Max; if it is the right type of bulb it will work for you.
view full answer... - Trailer Leaf Slipper Spring Hardware
- The Trailer Leaf Slipper Spring, part number SP-040275, is not galvanized or coated it is a solid steel leaf spring. The leaf springs are shipped with a light coat of paint for rust protection but are not rust proof. Coating or treating the springs would not work because of the flexing and rubbing the springs are subject to under the trailer. The leaf springs can be painted but the paint will not last long with the constant flexing and road debris hitting them. The mounting hardware...
view full answer... - Is Tinned Wiring Used In Trailer Wiring Kits
- The trailer wiring we offer like part # A40W5B, is designed to be used as a 5-wire harness, and works well with a trailer that has a surge coupler. The wires used in this harness are 16 gauge except the blue brake wire which is 18 gauge, and designed to be able to safely handle the current from a 12 volt system. The wires in this harness are not tinned.
From my research I found that tinned wire is normally used in industrial wiring and used when the operating temperature of the wire is...
view full answer... - Can MORyde Refrigerator Tray For RV Cargo Compartment Be Used To Hold A Forge?
- The MORryde Refrigerator Tray for RV Cargo Compartment - Side Pull - 26-1/2" x 18" # MR39RR is constructed of steel, but it does have a plastic handle. This may work for you, but keep in mind it technically was not designed to be used with hot devices and has not been tested in that aspect.
I recommend looking into one of the trays that are designed to be used with hot devices like generators. For this, the MORryde Generator Tray - 22-3/4" x 16-1/4" # MR49RR could be what you are looking...
view full answer... - Will Timbren Axle-Less Trailer Suspension System Work Well On Small Custom Utility Trailer
- With the trailer towing up to 5,000-lbs you can replace both axles on your trailer with 2 sets of the Timbren Axle-Less Trailer Suspension System, part # ASR3500S04, and they will be more than sufficient. The system is designed to make the ride much smoother regardless whether you are hauling a load or not.
The progressive springs get stiffer as more weight is added but are always engaged to reduce rattle and bottoming out. The axle-less system does come with a 4-bolt brake flange installed...
view full answer... - Location of Manufacturer and Warranty of Kenda Tires
- Kenda tires offer a 2 year limited warranty, and are manufactured in Taiwan or mainland China.
We have sold Kenda tires for years, and when properly inflated and kept at or below their 65 mph speed rating and when used within their weight rating, they work very well.
Always be sure to keep trailer tires inflated to the maximum psi listed on the sidewall. Failure to do so can lead to excess heat build up, which is the biggest enemy of trailer tires.
I see that the tire you referenced...
view full answer...
Go To Results